Hi
i changed something in bex query bu the chane is not seen in analysis for olap report.
How i can reset analyssi for olap to reflect changes.
When i try to delete query and add it again i lose all my graphs and varyants
could u please help
best regards
Good morning,
we have a Business Object BI 4.0 Installation , SP4 Patch 6. Our requirement is to define Analysis OLAP views on SSAS2008 OLAP Connection with SSO authentication mode.
Users can belong to different domains, all in a single forest (example: main domain is MAINDOM.COM, there are IT.MAINDOM.COM, FR.MAINDOM.COM, GER.MAINDOM.COM, etc..).
We configured Active Directory SSO following SAP notes:
We did following tests, all with positive results:
If we try to use a OLAP Connection with SSO, it is not possible to access SSAS cubes. Launching Analysis OLAP application and selecting the connection, system goes in loop. We found following logs produced by MDAS server:
httpclient.wire.header||<< "WWW-Authenticate: Negotiate[\r][\n]"‑
httpclient.wire.header||<< "WWW-Authenticate: NTLM[\r][\n]"‑
httpclient.wire.header||<< "WWW-Authenticate: Basic realm="DOM.COM"[\r][\n]"‑
httpclient.wire.content||<< " <h2>401 - Unauthorized: Access is denied due to invalid credentials.</h2>[\r][\n]"‑
httpclient.wire.content||<< " <h3>You do not have permission to view this directory or page using the credentials that you supplied.</h3>[\r][\n]"
...
org.apache.commons.httpclient.auth.AuthenticationException: Error establishing Kerberos security context (ODA10067)
...
Caused by: GSSException: No valid credentials provided (Mechanism level: Fail to create credential. (63) - No service creds)
...
Caused by: KrbException: Fail to create credential. (63) - No service creds
Few considerations follow:
Could someone give me a hint about this situation? Could we do some other tests to verify the correctness of the configuration?
Any help would be really appreciated!
L
Hi,
We've created an OLAP Analysis report based on a Calculated HANA view.
Our problem is, the order in which the list of Dimensions that get displayed in Data panel on the left side of report is not in the same order as in Calc Hana view.
For e.g. in the attached image, Dimension Order is,
1. Dimension 2
2. Dimension 1
3. Dimension 4
4. Dimension 3
But the actual order in HANA view is,
1. Dimension 1
2. Dimension 2
3. Dimension 3
4. Dimension 4
Could you please let us know if it is expected in OLAP Analysis to show the order differently than that of Hana view. Is there a way we can re-arrange the Dimension order in Data panel.
Thanks in Advance!
Thanks and Regards,
Ram
Hello,
Since I added a new selection in BEX querie rows structure, users can't use anymore their reports using this querie.
When they try to execute it, nothing happens.
They just have a internet explorer message (see in attachment).
But the report in the "official" folder (suported by IT team) works well after I transported BEX querie and promoted Web Analysis for Olap report.
We use :
-BW 7.31 SP9
-BEX query designer SP 0 Revision 681
-BI 4.1 SP2 patch 6
this is veryannoying becauseusers no longerhaveconfidence inBO
Does anyone have this problem and if yes what is the solution ?
Thanks in advance
Regards,
Nicolas
Hi Experts,
While creating OLAP connection in BO CMC i got error like below,
I have followed the below snote for this issue
1596347 - BI 4.0 - Error: "Unable to initialize the page. Verify that an MDAS Server is running and that the database client software has been installed on the server hosting the MDAS Server" after installing the Patch.
But still i am facing the same issue.
Please help me.
Thanks in Advance
Jana
Hello BI experts,
I'd like to know how to increase the maximum of value filters
A user would like to filters 200 materials keys and the system block (it works with 100 materials key).
Thank you very much for your help.
Regards,
Nicolas
Hello,
We are using Analysis workspace report (OLAP for analysis) based on bex queries.
We can NOT modify the sort by default imposed by OLAP for analysis, at navigation tab and cross table tab.
1) On the navigation tab : OLAP displays the bex objects using automatcally a sort by decription.
We would like modify this bex objects displaying (by grouping date axes at the first, then organisaion axes....).
2) When we add an object to the cross tab (result), OLAP uses automatically a sort by text (on the values).
We would like using rather that a sort by keys. In other words, we don't like having to do the sort by key after each new navigation.
Do you have any idea to resolve that ?
Thx a lot.
Bo version : 4.1 Support Pack 4 Patch 4
BW version : SAPKW74009.
Ricky.
I have an Analysis for OLAP report that uses a HANA calculation view as its data source. A variable is defined within the calculation view to prompt the user to select a value; the values for this variable come from another calculation view.
When the report is opened and the dropdown button is pressed within the Prompts window, the list of values from the variable definition are displayed in ascending order. Is it possible to have the values displayed in descending order? I don't see a means to specify that -- in either the calculation view nor within Analysis for OLAP.
Hey @ all,
after a Upgrade von BO 4.0 to BO 4.1 we get an error for only one Analysis OLAP Workspace.
Analysis, Edition für OLAP, hat um 8:59 PM eine unerwartete Ausnahme festgestellt und musste geschlossen werden.
"
Analysis, edition for OLAP encountered an unexpected exception at 9:17 PM that has caused it to close.
The following reasons may have caused the unexpected exception:
•Analysis, edition for OLAP has timed out. Your workspace may have been automatically saved to your Favorites folder as an "autosave" file.
•A fatal exception has occurred. Log on again to Analysis, edition for OLAP.
If you repeatedly see this error, contact your administrator."
We only get this error for one OLAP Report. All other Analysis for OLAP reports are working fine.
In Logging we only get errors in the CMS Service:
"
|f7a1a28b-a0cd-3bd4-4afb-4c924acc9ac3|2013 11 24 20:59:17:374|+0100|Error| | |E| |cms_Server.CentralManagementServer| 4380|3920|| |195|0|3|0|BIlaunchpad.WebApp|Server:5248:256.2724:1|BIPSDK.SessionMgr:getSession|Server:4268:23375.27353:3|cms_Server.CentralManagementServer.newService|localhost:4380:3920.175052:1|CtX7QLkD9kIvsH6qutALzNUaa2|||||||||||Failed to get session id from handle and handle is not set to bypass nor server-server discovery‑"
Thanks in advance
My users have many AOLAP reports that use HANA calculation views as their data source. When these users export the reports to Excel, the resulting Excel file contains twice as many tabs as are present on the reports. For each tab on the AOLAP report, the Excel file contains an accompanying tab with a "+" suffix in the tab name (e.g., "Customers", "Customers+", "Vendors", "Vendors+", etc.); this accompanying tab lists the criteria (e.g., start date, end date, etc.) the user selected upon loading the report. Is there a way to suppress these criteria tabs...or perhaps include only one such tab, since the criteria is the same for the entire report and, therefore, doesn't need to be repeated for every tab?
Also, the 'Export to XLSX' dialog box that appears when the user presses the 'Export to Excel' button is confusing:
Does anyone know how get around downloading a workspace to excel with an Infinity symbol? Screen shot below is the error message with the infinity symbol on the Margin % column. I can modify the cube to have zero values in the measure but the change to the cube would result in a very large report with lots of zero records which I am trying to avoid. I can also download the workspace as a csv but I then lose all the formatting of the report.
Currently running: SAP BusinessObjects BI Platform 4.1 Support Pack 2 Patch 2 Version: 14.1.2.1195
2008 MDAS database.
Hi,i hav created Bex Query and a analysis report on top of it.I did some change in the bex query i.e., i removed one condition from the beX query and its not getting reflected in the report.I get the same results as before.wat can i do to rectify this?
Our OLAP View has 3 sheets, each out of different query from a common cube connnection.
All the 3 queries has exactly same input variables.
From Promt merge functionality, could we expect user to enter the variable just once for all the 3 sheets?
Now, clicking on each sheets - prompts user each time.
Observation:
Clicking on merge prompt in the prompt screen changes the name of the connection to "SAP Netweaver Business Warehouse"
Any help is highly appreciated
Thanks
VeeKay
Dear Experts,
We are using BO 4.1 SP4 version.While using BEx query as a source in the Analysis Edition For OLAP,we are facing error like"An error occurred in the MDAS service while processing a request from Analysis, edition for OLAP. Try the operation again. If the problem persists, please contact your administrator. (AOC00041)".The description as "Failed to get representation: RuntimeException occurred : java.lang.IllegalArgumentException: The BICS ValueException type [NO_OPERATION] is not supporte".
Please suggest on this.
Regards,
Venkat
Hello,
Since I added a new selection in BEX querie rows structure, users can't use anymore their reports using this querie.
When they try to execute it, nothing happens.
They just have a internet explorer message (see in attachment).
But the report in the "official" folder (suported by IT team) works well after I transported BEX querie and promoted Web Analysis for Olap report.
We use :
-BW 7.31 SP9
-BEX query designer SP 0 Revision 681
-BI 4.1 SP2 patch 6
this is veryannoying becauseusers no longerhaveconfidence inBO
Does anyone have this problem and if yes what is the solution ?
Thanks in advance
Regards,
Nicolas
Hi,
I am trying to create a OLAP Connection to a multitenant SAP HANA DB (SP 09) from CMS ( 4.0 SP 05).But I am getting below error
I checked SAP Note#1779252 and installed SAP HANA Studio and was able to connect to the DB w/o any issue.Please suggest.
Thanks,
Mofizur
I am looking for a way to change the default search feature of a prompt from key to text. Is this possible?
Thanks for your help!
Keith Haggard
Hi,
Version: BI 4.0 SP8.3 with Microsoft SQL Server 2012
When you receive the following warning message, what is the single best method to find out exactly what members are missing?:
Analysis edition for OLAP could not find one or more members in this analysis, possibly because the cube has been updated. The hierarchy containing these members has been removed to allow the analysis to be executed.
Thanks,
Michael
Hi,
Is it possible to create customized hierarchy in OLAP?
Sreeni
I have an Analysis for OLAP report that uses a HANA calculation view as its data source. A variable is defined within the calculation view to prompt the user to select a value; the values for this variable come from another calculation view.
When the report is opened and the dropdown button is pressed within the Prompts window, the list of values from the variable definition are displayed in ascending order. Is it possible to have the values displayed in descending order? I don't see a means to specify that -- in either the calculation view nor within Analysis for OLAP.